China LED Advertising LED Advertising Lightbox LED Soft Film Advertising Lightbox is composed of soap-free aluminum alloy frame, LED module light source, soft film cloth. The lightbox LED strips are arranged neatly and beautifully. Adopting constant current circuit, the structure is safe and simple. It has no ultraviolet ray, no infrared ray, no strobe phenomenon, more green and environmental protection. The screen of the light box can be installed with elastic cloth, woven cloth or ceiling soft film sewing silicone strip, which can quickly replace the screen and ensure that the screen will not fade in 5 years. Advantages Our LED Soft Film Advertising Lightbox is easy to install and use. The LED energy-saving lamp beads used are a kind of very energy-saving and environmentally friendly product. This product is aging resistant, rust proof and easy to use. The service life is increased due to the use of some anti-aging and corrosion resistant materials. It is a new generation of environmentally friendly energy-saving light box products. Installation steps: 1. Before installing the soft film light box, first go to the construction site to see if the conditions are met, whether the installation wall has a stress point, and different wall installation methods are different 2. If the site conditions are met, the construction will be carried out first, and the finished soft film light box must be made according to the design requirements of the soft film light box drawing. 3. Prepare the soft film aluminum profiles and accessories (large angle code/small angle code) base plate, power supply, light cloth, other tools (screwdriver/screw/tape/gloves) and other materials. 4. According to the 45-degree angle, first combine the soft film profiles with the frame, and put the corners together, and check whether the diagonals of the soft film profiles are the same. 5. Tighten the screws on the inner and outer corners with a screwdriver to ensure that the diagonals are equal, and the screws have a fixed effect, so that the entire soft film light box frame is completed 6. Put the back panel into the frame and fix it with screws, then lay the LED strip on the back panel, fix it with double-sided tape or screws, and install the power supply on the edge of the frame where the wires go out (the red and blue wires are connected separately) 7. Install the soft film light box on the wall according to the requirements, and fasten the four sides with screws according to the actual situation. 8. Install the canvas, put the silicone strip around the UV soft film (fixed when making the picture), press it into the aluminum frame card slot by hand, change the picture and pull out the rubber strip. This way, stylish and simple design, easier to replace 9. It is to check the overall effect of the soft film light box picture, adjust the picture tightness according to the situation, and achieve the most ideal effect. About Us We constantly promote technological innovation to provide customers with healthy, safe, energy-saving and environmentally friendly LED Soft Film Advertising Lightbox of the highest quality, and win trust and reputation through convenient and efficient customer service. We are forward-thinking in our work and actively establish new methods and ideas. Our company insists on saving cost, improving efficiency and creating value for customers. Therefore, our company is deeply trusted by new and old customers. We always regard honesty as the foundation, the basis of development and the source of credibility, and take the construction of honesty as a major issue concerning the life of the enterprise.China LED Advertising website:http://www.zonesu-tech.com/led-advertising/